True Fitness TREADMILL 2011 Service Manual page 53

PROGRAMMING TV PRESET CHANNEL LOCATIONS
Plug stereo headphones into console and wear headphones for
remaining steps of TV Programming.
•Programming the first preset channel
1.If you clearly hear the TV audio that want to program in the first
preset channel location, then press the MUTE key to save it.
"SAVE FREQ TO CHAN" will display.
2.If you do not hear the TV audio that you want, press the VOL Λ key
to select the desired TV transmitter audio, and then press the
MUTE key to save it.
NOTE: The order in which TV transmitter audio channels are saved
determines their displayed TV channel number when in normal
display mode. The first TV transmitter audio channel saved will
become "TV CHAN 1", and the next TV transmitter audio channel
saved will become "TV CHAN 2", etc.
►PROGRAMMING THE NEXT TV PRESET CHANNEL (and remaining
channels)
•Repeatedly press the VOL Λ key until you hear the TV audio that
you want to program, and then press the MUTE key to save it. Use
this same procedure to program all other preset channel locations for
all remaining visible TV's.
If you accidently save TV audio to the wrong preset channel location,
press the SOURCE key to unsave it. "UNSAVE FREQ IN CH" will
display. Then repeat STEP 10 for desired TV audio source.
•To exit programming mode, Press and hold the CLEAR ENTRY key
until display blanks and resets to normal operate mode.
TV Programming is now complete.
Should you need technical assistance for your TRUE Fitness product contact TRUE Fitness
Technical Support at 1-800-883-8783
Proprietary & Confidential Proprietary & Confidential
TRUE Fitness Technology, Inc. TRUE Fitness Technology, Inc.
WIRELESS SET-UP (cont.)
Tread Service Manual - July 2011
061
53