Table of Contents
Advertisement
APPENDIX A: MOTOR CONTROLLER BLINK CODES
12 Overload condition for 15 seconds
Total loss of speed sensor when unit is running Will
13
not display when unit is not running
14
Power devices on controller are overheating
15 Drive motor is overheating
16 Reserved - Not currently in use
18 Peak overcurrent
19 Peak overcurrent
20 Peak overcurrent
21 Peak overcurrent
22 Peak overcurrent
23 Peak overcurrent
24 Peak overcurrent
25 Controller caps overcharge
Proprietary & Confidential
Proprietary & Confidential
TRUE Fitness Technology, Inc.
TRUE Fitness Technology, Inc.
Tread Service Manual - July 2011
a.
Replace speed sensor
a. Check for proper ventilation and
heat-sync compound
b.
Replace controller
a.
Check for proper ventilation
Replace drive motor
a.
Replace controller and drive motor
a.
Replace controller and drive motor
a.
Replace controller and drive motor
a.
Replace controller and drive motor
a.
Replace controller and drive motor
a.
Replace controller and drive motor
a.
Replace controller and drive motor
a.
Replace controller
46
Hide quick links:
Advertisement
Table of Contents
