True Fitness TREADMILL 2011 Service Manual page 20

E5 Sensor (Belt moves for 5-10 seconds.)
No Speed Sensor Feedback
First check to see if the RPM light flashes on the lower board
Smart Board-if applicable)
belt by hand.
If there is no LED flashing on either board proceed to the following
steps. If the LED flashes perform a continuity check on the data
cable. If the cable checks good, replace the upper board.
All current production models have a RPM LED on the lower boards.
Proprietary & Confidential Proprietary & Confidential
TRUE Fitness Technology, Inc. TRUE Fitness Technology, Inc.
E5 SENSOR
when moving the drive motor and running
Tread Service Manual - July 2011
(and the
20