Interface Block Setting - Kyocera ECOSYS M2030dn Operation Manual

Interface Block Setting

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• USB Storage (USB storage setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name:
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
I/F Block Set.:
1
*********************
USB Host
2
USB Device
3
USB Storage
1
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
2
The System/Network menu appears.
a b
[ Exit ]
3
Press the  or  key to select [I/F Block Set.].
4
Press the OK key. The I/F Block Set. menu appears.
a b
[ Exit ]
5
Press the  or  key to select [USB Host].
8-173
Default Setting (System Menu)
8