Kyocera ECOSYS M2030dn Operation Manual page 383

USB Device:
1 *Unblock
*********************
2
Block
USB Storage
This locks and protects the USB interface connector (USB Storage). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name:
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
I/F Block Set.:
1
*********************
USB Host
2
USB Device
3
USB Storage
6
Press the OK key. USB Device appears.
a b
7
Press the  or  key to select [Unblock] or [Block].
8
Press the OK key. Completed. is displayed and the
screen returns to the System menu.
1
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
2
The System/Network menu appears.
a b
[ Exit ]
3
Press the  or  key to select [I/F Block Set.].
4
Press the OK key. The I/F Block Set. menu appears.
a b
[ Exit ]
5
Press the  or  key to select [USB Storage].
8-175
Default Setting (System Menu)
8