Dhcp; Dhcp Settings - TP-Link Archer C5 AC1200 User Manual

4.9

DHCP

Figure 4-47 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-47): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding functions.
4.9.1

DHCP Settings

Choose menu "DHCP → DHCP Settings", you can configure the DHCP Server on the page as
shown in Figure 4-48.The router is set up by default as a DHCP (Dynamic Host Configuration
Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the router on the LAN.
DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must

have another DHCP server within your network or else you must configure the computer
manually.
Start IP Address - Specify an IP address for the DHCP Server to start with when assigning

IP addresses. 192.168.0.100 is the default start address.
End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP

addresses. 192.168.0.199 is the default end address.
Address Lease Time - The Address Lease Time is the amount of time a network user will

be allowed connection to the router with their current dynamic IP Address. Enter the amount
Archer C5 AC1200 Wireless Dual Band Gigabit Router
Figure 4-48 DHCP Settings
- 63 -