Wireless Mac Filtering - TP-Link Archer C5 AC1200 User Manual

4.7.4

Wireless MAC Filtering

Choose menu "Wireless → MAC Filtering", you can control the wireless access by configuring
the Wireless MAC Filtering function, shown in Figure 4-24.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address - The wireless station's MAC address that you want to filter.

Status - The status of this entry, either Enabled or Disabled.

Description - A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-25:
Figure 4-40 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX
00-0A-EB-B0-00-0B.
Archer C5 AC1200 Wireless Dual Band Gigabit Router
Figure 4-39 Wireless MAC Filtering
(X is
- 56 -
any hexadecimal digit). For example: