TP-Link Archer C5 AC1200 User Manual page 29

Wireless Radio - Choose from the drop-down list to enable or disable the wireless radio.

Wireless Network Name - Also called the SSID (Service Set Identification). Enter a

value of up to 32 characters. The same name must be assigned to all wireless devices in
your network. The default SSID is set to be TP-LINK_5GHz_XXXXXX. This value is
case-sensitive. For example, TEST is NOT the same as test.
Region - Select your region from the drop-down list. This field specifies the region where

the wireless function of the router can be used. It may be illegal to use the wireless
function of the router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.

Note:
Limited by local law regulations, version for North America does not have region
selection option.
Wireless Security

Disable Security - The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the router without encryption.
Enable Security (WPA-PSK/WPA2-PSK) – It's selected by default, with the

default PSK password the same as the default PIN code.
Archer C5 AC1200 Wireless Dual Band Gigabit Router
Figure 3-14 Quick Setup – Wireless
- 19 -