ZyXEL Communications EMG1302-R10A User Manual page 18

Chapter 2 Introducing the Web Configurator
Type "http://192.168.1.1" as the website address.
3
Your computer must be in the same subnet in order to access this website address.
If you are logging in with the "admin" account, type "1234" (default) as the password.
4
If you are logging in with the "supervisor" account, type "supervisor" (default) as the password.
Then click Login.
Figure 4 Admin Account Login
The following table describes the labels in this screen.
Table 3 Login screen
LABEL
User Name
Password
Login
You should see a screen asking you to change your password (highly recommended) as shown
5
next. Type a new password (and retype it to confirm) and click Apply or click Ignore.
Figure 5 Change Password Screen
18
DESCRIPTION
Type "admin" or "supervisor" as the user name.
Type "1234" (default) as the password.
Click Login to enter the EMG1302-R10A's web configurator.
EMG1302-R10A User's Guide