Troubleshooting; Chapter 22 Troubleshooting; Overview; Power, Hardware Connections, And Leds - ZyXEL Communications EMG1302-R10A User Manual

22.1 Overview

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• EMG1302-R10A Access and Login
• Internet Access
• Resetting the EMG1302-R10A to Its Factory Defaults
• Wireless Router/AP Troubleshooting
22.2 Power, Hardware Connections, and LEDs
The EMG1302-R10A does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the EMG1302-R10A.
1
Make sure the power adaptor or cord is connected to the EMG1302-R10A and plugged in to an
2
appropriate power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the EMG1302-R10A.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Disconnect and re-connect the power adaptor to the EMG1302-R10A.
4
If the problem continues, contact the vendor.
5
EMG1302-R10A User's Guide
C
HAPTER

Troubleshooting

Section 1.5 on page
2 2
14.
159