User Manual
Sequence.
4.4.1 Basic System mode
If it uses [AUTO] button
-
Press [MENU] button
-
button at Function menu.
Move to "Screen Setup" from OSD menu.
-
Move to "Monitor" under "Screen Setup", and press [ENTER] button or click left mouse.
-
Select "SEQ. Dwell Time" and set wanted value from 1 to 16 seconds. When it sets to
-
'Off', user sequence view does not operate.
User Sequence mode is usable by pressing [AUTO] button from every division mode.
-
Press [AUTO] button once again to exit from User Sequence mode.
-
4.4.2 User Sequence mode
Press [AUTO] button. When using mouse, press Auto button
-
User Sequence sets the item of User Sequence Conf. from "Monitor" of OSD menu.
-
, it can setup sequence channels to view automatically.
to set up sequence period. When using mouse, press menu
25
from Function menu.