4.4.1 Basic System Mode
-
Pressing the [AUTO] button or clicking
cycle through the set channels.
-
Press [MENU] button or click
-
Go to "Screen Setup" from OSD menu.
-
Go to "Monitor" under "Screen Setup", and press [ENTER] button or left-click.
-
Select "SEQ. Dwell Time" and assign the desired value ranging from 1 to 60. When set to
Off, user sequence view function will not operate.
-
User sequence mode can be accessed by pressing [AUTO] button from every partition
mode.
-
Press [AUTO] button once again to exit from user sequence mode.
4.4.2 User Sequence Mode
-
Press [AUTO] button or click
-
To activate user sequence, set "Monitor" to User Sequence in the OSD menu.
in the function menu will cause the DVR to
in the function menu to set up sequence period.
from the function menu.
25
User Manual