One Touch; Assign A One-Touch Entry - AT&T MS2015 User Manual

4-line small business deskset
Hide thumbs Also See for MS2015:
Table of Contents

Advertisement

Telephone operation

One touch

This deskset has 32 one- and two-touch memory locations (speed dial
locations) where you can store the phone numbers or system extension
numbers you wish to dial using fewer keys than usual. You can store up to
30 digits in each location.
You can access the first 16 locations using only the one-touch buttons. To
access the remaining 16 locations, press LOWER and then the one-touch
button for the desired location. You might wish to write the names, telephone
numbers, or extension numbers of the one-touch entries on the directory
card, using the light gray spaces for the upper 16 locations and the white
spaces for the lower 16 locations.

Assign a one-touch entry

Use the following steps to program the one-touch keys.
1.
When the deskset is idle, press MENU
2.
Press
or
SELECT or /SKIP.
MENU/
3.
Press
or
SELECT or /SKIP.
MENU/
4.
The screen displays Enter Number:
5.
Use the dialing keys to enter a telephone number
(up to 30 digits) or an extension number.
Press DELETE to delete a digit.
Press /REPEAT or /SKIP to move the cursor to
the left or right.
You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press
or
SELECT. A P appears on the screen.
MENU/
Store a signal for switching to temporary tone signaling. If you have dial
pause (rotary) service, this signal is required for some special services.
Press
or
on the screen. All numbers you enter after this will send touch-tone signals
during dialing.
You can store the flash signal required by some special services as part of a
dialing sequence. Press
SELECT. An F appears on the screen. Continue storing the number
MENU/
as usual.
to scroll to One Touch, then press
to scroll to Program, then press
to choose Add pause, then press
to choose Send tone, then press
or
.
/SELECT
to choose Add flash, then press
49
System Setup
Ringers
Set Date/Time
>One Touch
One Touch
View
>Program
Enter Number:
18002223111_
Select to:
Done
SELECT. A T appears
MENU/

Advertisement

Table of Contents
loading

Table of Contents