Table of Contents
Advertisement
Getting started
System setup
Network setup (continued)
SELECT to proceed. The screen displays
7.
Press
MENU/
Router/Gateway: XXX.XXX.X.XXX. Use the dialing
keys to enter a specific gateway.
•
Press DELETE to delete a digit.
•
Press # to add a dot.
to add a dot. .
•
Press /REPEAT or /SKIP to move the cursor to
the left or right.
8.
Press
SELECT to save. The screen displays
MENU/
IP obtained: XXX.XXX.X.XXX Check network info?
Press
SELECT to read the network info, or press
MENU/
CANCEL to return to the main menu.
•
If the IP entered is invalid, the screen displays
IP is invalid. briefly, and then returns to the
Enter static IP screen.
9.
Reboot the deskset to update the IP.
Discovery method
Use this feature to change the connection mode of the deskset when you
changed to a different router. By default, the discovery method is set to
Mode B.
To change the discovery method:
1.
When the console is idle, press MENU
2.
Press
SELECT again or /SKIP to select
MENU/
System Setup.
3.
Press
or
SELECT or /SKIP.
MENU/
4.
Press
or
press
SELECT or /SKIP.
MENU/
5.
Press
or
Mode B (Default), then press
or /SKIP to save the setting. To exit without
making changes, press CANCEL.
to scroll to Network Setup, then press
to scroll to Discovery method, then
to scroll between Mode A or
MENU/
.
/SELECT
SELECT
25
Router/Gateway:
192.168.1._
<'#' = Add dot>
IP obtained:
192.168.1.3
Check
network info?
Network Setup
Auto set IP
Set static IP
>Discovery Method
Discovery Method
Mode A
>Mode B (Default)
Advertisement
Table of Contents
