Table of Contents
Advertisement
5
Insert the two plastic pins on the hard disk unit into the metal casing holes.
6
Attaching the protrusion and the connector to the control board, push the hard disk unit firmly into place.
7
Close the control board cover, and then slide it towards the front of the printer.
8
Turn the screw clockwise.
9
Turn on the printer.
10
Print the Printer Settings page to confirm the optional hard disk unit is installed correctly.
Press the
(Menu) button.
a
Select Report / List, and then press the
b
Select Printer Settings, and then press the
c
The Printer Settings page is printed.
button.
button.
51
Basic Operation
Advertisement
Table of Contents
