Table of Contents
Advertisement
WPS-PIN
The PIN code of WPS-PIN can only be configured from the operator panel.
NOTE:
•
WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required
for wireless configuration by entering PIN assignments to a printer and computer. This setting, performed through an access
point, is available only when the access points of your wireless router supports WPS.
•
Before WPS-PIN starts, you will need to enter your PIN code at the web page of the wireless LAN access point. For details,
refer to the manuals provided with the wireless LAN access point.
1
Press the
(Menu) button.
2
Select Admin Menu, and then press the
3
Select Network Setup, and then press the
4
Select WPS Setup, and then press the
5
Select PIN Code, and then press the
6
Write down the displayed 8-digit PIN code or select Print PIN Code, and then press the
code is printed.
7
Select Start Config., and then press the
8
Ensure that the message Please wait WPS Setting is displayed, and enter the PIN code displayed on
step
7
into the wireless LAN access point.
NOTE:
•
For details about WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN
access point.
When the WPS operation is successful and the printer is rebooted, wireless settings are correctly configured.
Operator Panel
Auto SSID Setup
1
Press the
(Menu) button.
2
Select Admin Menu, and then press the
3
Select Network Setup, and then press the
4
Select Wireless Setup, and then press the
The printer automatically searches the access points on wireless network.
5
Select the desired access point, and then press the
If the desired access point does not appear, go to
NOTE:
•
Some hidden SSID may not be displayed. If the SSID is not detected, turn on SSID broadcast from the router.
6
Enter the WEP key or pass phrase, and then press the
The Restart Printer to apply setting message appears.
7
Turn off the printer, and turn it on again to apply the settings.
Wireless settings are correctly configured.
IMPORTANT:
•
If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.
button.
button.
button.
button.
button.
button.
button.
button.
button.
"Manual SSID Setup" on page
button.
Printer Connection and Software Installation
button. The PIN
106.
105
Advertisement
Table of Contents
