Table of Contents
Advertisement
Setting Client Certificate for IEEE 802.1x (EAP-TLS)
NOTE:
•
To manage digital certificates, you must first set encryption of the optional hard disk unit to On, and then set up HTTPS
communication. For details, see
•
This feature is enabled only when Enable is set for IEEE 802.1x (EAP-TLS).
1
Import a certificate to be used with SSL Client.
See also:
• "Importing a Digital Certificate" on page 147
2
Set a certificate to be used with SSL Client.
See also:
• "Setting a Digital Certificate" on page 148
3
Confirm whether the certificate is set correctly.
See also:
• "Confirming the Settings of a Digital Certificate" on page 149
4
After restarting the printer, the IEEE 802.1x (EAP-TLS) certificate is presented when IEEE 802.1x
communication with the RADIUS server starts. When the RADIUS server is set to require a client certificate,
the client certificate provided by the printer is verified by the RADIUS server.
"Preparing to Manage Certificates" on page
145.
Printing Basics
157
Advertisement
Table of Contents
