Format Hdd; Adjust Altitude; Clear Storage - Fuji Xerox DocuPrint CP405 d User Manual

• Clear Storage

NOTE:
• Clear Storage feature is available only when the optional 512MB memory is installed and RAM Disk is set to Enable, or
when the hard disk unit is installed.
Purpose:
To clear all files stored as Secure Print and Sample Print in the RAM disk.
Values:
All Clear
Secure Document
Stored Document

• Format HDD

NOTE:
• Format HDD feature is available only when the hard disk unit is installed.
Purpose:
To initialize the hard disk unit.
• Non-Genuine
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
• Using a non-Fuji Xerox toner cartridge may severely damage your printer. The warranty does not cover damages caused by
using non-Fuji Xerox toner cartridges.
Values:
Toner Off
On

• Adjust Altitude

Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
NOTE:
• An incorrect altitude adjustment setting leads to problems such as poor printing quality and incorrect indication of remaining
toner.
Values:
*
0m
1000m
2000m
3000m
184
Using the Operator Panel Menus
Deletes all files stored as Secure Print and Sample Print in the RAM disk or the hard disk
unit.
Deletes all files stored as Secure Print in the RAM disk or the hard disk unit.
Deletes all files stored as Sample Print in the RAM disk or the hard disk unit.
*
Does not use toner cartridge of another manufacturer.
Uses toner cartridge of another manufacturer.
Sets the altitude of the location where the printer is installed.