Rip Setup - Planet WNRT-633 User Manual

Subnet Mask
Gateway
Show Routing Table
Static Routing table

5.8.2 RIP Setup

The page is used to set up dynamic routing protocol or edit static route entry. After the configuration,
please click the "Apply" button to save the settings.
The page includes the following fields:
Object
Enable Dynamic
Route
The subnet mask of destination IP.
The gateway is the router or host's IP address to which packet was
sent. It must be the same network segment with the WAN or LAN port.
Clicking this button will show you all the routing table of the system.
It only shows the static routing table and you can delete one or all.
Figure 5-8-2 RIP Setup
Click this box to enable Dynamic Route.
-77-
User's Manual of WNRT-633
Description