Wps - Planet WNRT-633 User Manual

5.5.7 WPS

WPS (Wi-Fi Protected Setup) is designed to ease setup of security Wi-Fi networks and subsequently
network management. This Wireless Router supports WPS features for AP mode, AP+WDS mode,
Infrastructure-Client mode, and the wireless root interface of Universal Repeater mode.
Simply enter a PIN code or press the software PBC button or hardware WPS button (if any) and a
secure wireless connection is established.
 PBC: If you find the WPS LED blinking for 2 minutes after you press the hardware WPS
button on the device, it means that PBC encryption method is successfully enabled.
And an authentication will be performed between your router and the
WPS/PBC-enabled wireless client device during this time; if it succeeds, the wireless
client device connects to your device, and the WPS LED turns off. Repeat steps
mentioned above if you want to connect more wireless client devices to the device.
PIN：To use this option, you must know the PIN code from the wireless client and enter it in

corresponding field on your device while using the same PIN code on client side for
such connection.
Choose menu "Wireless  WPS", and you can configure the setting for WPS. After the configuration,
please click the "Apply" button to save the settings.
Figure 5-5-12 WPS (Wi-Fi Protected Setup)
-66-
User's Manual of WNRT-633