Manual Installation - Network Setup - Planet WNRT-617G Quick Installation Manual

Step 2: Follow the figure below to connect the network devices. It depends on
your demand to connect wired DSL/cable modem or 3G/4G USB modem,
or both (as a backup).
Power
Power
Adapter
RJ-11
Phone Jack
4. MANUAL INSTALLATION – NETWORK SETUP
A computer with the UTP cable connected to the Wireless Router is required for the
first-time configuration
Steps: Set your computer to get an IP address from the Wireless Router (Based
on Windows 7):
1. Click the "Start" button located at the lower-left corner of your
computer.
2. Click "Control Panel".
3. Double-click the "Network and Sharing Center" icon.
4. Click "Change Adapter Settings".
5. Double-click "Local Area Connection".
6. Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Prop-
erties".
ON/OFF
POWER
RJ45
DSL/Cable Modem
1-3
3G/4G USB Modem
WAN 4 3 2 1
RJ45
USB
PC/Laptop