Planet WNRT-633 User Manual page 47

Step 1. Enable DDNS, and then select "PLANET DDNS".
To set up for DDNS, follow these instructions:
Step 1. Type the Domain Name you received from dynamic DNS service provider.
Step 2. Type the User Name for your DDNS account.
Step 3. Type the Password for your DDNS account.
Step 2. Go to "Security Setup-> Security" page to allow remote access from WAN port.
Step 3. Apply the settings, and ensure you have connected the WAN port to the internet by Ethernet
cable.
Figure 5-3-5 PlanetDDNS Settings
Figure 5-3-6 Enable Web Access on WAN
-40-
User's Manual of WNRT-633