Site Survey - Planet WNRT-633 User Manual

The page includes the following fields:
Object
Enable WDS
MAC Address
Data Rate
Comment
Set Security
Show Statics
Current WDS AP List
1. WDS feature can only be implemented between 2 wireless devices that both
support the WDS feature. Plus, SSID, channel, security settings and security
key must be the same on both such devices.
2. To encrypt your wireless network, see
device after you save your wireless security settings; otherwise, the WDS feature
may not function.

5.5.6 Site Survey

Choose menu "Wireless  Site Survey" to scan the available local AP. If any Access Point is found,
you could choose any one to connect with manually when the Client Mode is enabled.
Check the box to enable the WDS function. Please select WDS or
AP+WDS in the Mode of Wireless Basic Settings before you enable
WDS on this page.
You can enter the MAC address of the AP you want to connect with.
Default is "Auto".
You can make some comment for each MAC address on the list.
Click the "Set Security" button, then configure the wireless security
parameters of the AP you want to connect via WDS.
Click the "Show Statics" button to show the WDS AP.
You can select some MAC address of the AP, and click the "Delete
Selected" button to delete it.
Figure 5-5-11 Wireless Site Survey
-65-
User's Manual of WNRT-633
Description
sections 5.5.3. Do remember to reboot the