Nikon ECLIPSE 50i Instructions Manual page 72

(6) Attach a light shield to the front bottom of the
Epi-fl attachment with the tool stored in the
back of the microscope.
12
Attaching a Camera (when using a camera)
12-1 When attaching to the ergonomic binocular tube:
(1) To attach a camera head, screw it into the C
mount on the DSC port.
(2) Remove the rear cover of the ergonomic
binocular tube and insert the DSC port.
(3) Secure the DSC port into place with the tool
stored in the back of the microscope.
(4) Attach the camera cable to the camera head.
(Adjust the camera head position before using
the camera. Refer to 2.4 Photomicroscopy.)
12-2 When attaching to the trinocular eyepiece tube
(1) Attach the camera head to the trinocular eyepiece tube using the DSC adapter.
(2) Attach the camera cable to the camera head.
(Adjust the camera head position before using the camera.)
Chapter 4 Assembly
DSC port
fixing screw
69
Light shield
Light shield attached in place
Camera head
DSC port
Camera cable connector
Camera fine
focus adjusting
ring
Attachment guide
Camera centering
fixing screw
screws
4