Oki Microline Ml184T+ Handbook page 56

Manual paper loading with the cut-sheet feeder installed.
1. Gently insert the paper from directly above the front sheet support.
2. Use the FORM FEED button to feed the manually loaded paper.
3. Turn the platen knob clockwise/anticlockwise until the sheet is in the
desired position.
Notes: 1. The manually set sheet is printed automatically even when other sheets are
loaded in the hopper. (When the FORM FEED button is pressed, the manually
set sheet will be fed into the cut-sheet feeder.)
2. Do not manually feed paper if a sheet is being fed from the hopper. Simultane-
ously feeding paper may result in a paper jam.
3. To manually feed a sheet of paper, you must use the FORM FEED button, and
use the platen knob to adjust the papers position in the printer. If the paper is being
fed manually and is positioned using the platen knob rather than the FORM FEED
button it may be ejected just before printing begins.
2 -- 34 Operating Your Printer
Front sheet
supporter
Slot for setting
manually
FORM FEED button