Oki Microline Ml184T+ Handbook page 16

18. To stop the test, press the SEL button (located on the front panel) or
turn the power switch OFF.
After the printer has shown that it is functioning correctly, you are ready
to connect your computer. First, you need an interface cable. If you do not
have one, see your computer dealer or, if you have the equipment and the
technical expertise, make your own cable using the instructions in Appen-
dix C.
Attention: Install your printer away from a CRT. An electromagnetic field may create a
distortion on your computer screen.
1 -- 10 Setting Up