Loading Single Sheets - Oki Microline Ml184T+ Handbook

Loading Single Sheets

The ML184 Turbo+ can accommodate standard single sheets of 216 by
297 or 355 mm (8.5 by 11-inch or 14-inch) paper. Only one copy, with no
carbons, can be printed at a time.
Remove the tractor feed unit and any other accessories before using the
paper separator.
Operation
1. Place the paper release lever in its rear (closed) position.
2. Place the printer OFF LINE. (Press the SEL switch.)
3. Close the paper bail lever (Place it in its rearward position.)
4. Raise the paper separator as shown in the figure. (The paper separator
remains raised to prevent the paper separator from falling.)
5. Adjust the cut sheet guide on the paper separator to the printing pat-
tern to be used.
Cut sheet guide
Paper bail lever
2 -- 22 Operating Your Printer
Single sheet
Paper separator
Stay