Oki Microline Ml184T+ Handbook page 38

Rear Feed Paper Loading:
1. Put the printer on a desk or table.
2. Place the box of paper behind the printer.
3. Remove the access cover and lift the Bail bar.
4. Open the paper release lever.
5. Insert the first sheet of paper in the paper guide after letting a paper
pass to slit of the paper separator.
6. Push the paper in just enough so that its sprocket holes engage the
sprocket pins located on the platen ends.
7. Turn the platen knob to advance the paper until it appears in front of
the platen.
Bail bar
8. Lower the Bail bar.
9. Close the paper release lever.
2 -- 16 Operating Your Printer
Paper guides
Paper release lever