True CS400 Owner's Manual page 14

CHAPTER 2: ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY CHECK LIST (continued):
Hardware Pack:
Item
a
b
c
d Washer M8 - Internal Tooth
e
f
g
h
i
j
k
NOTE: Consult your TRUE Fitness TCS400 Treadmill Owner's Manual for information related to item (h) Tread Belt
Lubricant for Tread Belt lubrication procedure and item (i) T-Spanner – 8mm for Tread belt Adjustment.
Tool Requirements:
•
Hex Key – 5mm, T-Spanner-8 mm, Wrench 17mm (included with hardware kit)
•
7/16 Open End Wrench (not included)
•
Long Nose Pliers (not included)
• #2 Phillips Screwdriver (not included)
Description
Wire Tie
Bolt M8 x 1.25 x 75mm
Screw M4 x 0.7 x 10mm
Bolt M8 x 1.25 x 80mm
Bolt M8 x 1.25 x 40mm
Shoulder Plates
Tread Belt Lubricant
T- Spanner – 8mm
Wrench 17mm
Hex Key – 5mm
Truefitness.com / 800.426.6570 / 636.272.7100
Qty
3
8
19 Shoulder Cover-Top and Bottom
20
4
8
8
1 Under Tread belt
1 Tread Belt Adjustment
1 Hex Head Bolt – Pedestal Front
1
Where Used
Cables
Pedestals
Various
Hand Rails
Console Rack
Console Rack
Various
10