VESA Cover with Kensington Lock Bracket
The square, metal VESA cover is located in the middle, bottom of the computer. It is secured with 4
screws. The Kensington Lock bracket is permanently mounted to the VESA cover.
Figure 7-41
To remove the VESA cover:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the rear cover (see
3.
Remove the system board cover (see
74
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
VESA cover with Kensington Lock bracket location
40).
Rear Cover on page
Preparing to Disassemble the Computer
41).
System Board Cover on page
60).