HP TouchSmart Elite 7320 Maintenance & Service Manual page 65

3. Remove the Torx screw (1) that secures the module to the computer, and lift the module from
the computer as far as the cable allows (2).
Figure 7-18 Removing the webcam module assembly
4. Disconnect the cable from the module.
Figure 7-19 Disconnecting the webcam cable
5. Remove the two screws (1) that secure the module to the bracket, and then separate the module
from the bracket (2).
Figure 7-20 Removing the webcam module from the bracket
To install a webcam module, reverse the removal procedures.
Webcam Module 57