Removal And Replacement Procedures All-In One (Aio) Chassis; Preparing To Disassemble The Computer - HP TouchSmart Elite 7320 Maintenance & Service Manual
All-in-one business pc
Hide thumbs
Also See for TouchSmart Elite 7320:
- Getting started (19 pages) ,
- User manual (74 pages) ,
- Specification (9 pages)
Table of Contents
Advertisement
7
Removal and Replacement Procedures
All-in One (AIO) Chassis
The following sections provide information about disassembling various components of the computer.
Preparing to Disassemble the Computer
To avoid injury and equipment damage, always complete the following steps in order, when opening
the HP Pro All-in-One.
1.
Remove all media (CD, DVD, etc.) from the computer.
2.
Shut down the computer.
3.
After the system has completely shut down, disconnect the power adapter from the back of the
HP Pro All-in-One.
4.
Disconnect all other attached cables from the back of the computer.
5.
Place the computer face down on a soft flat surface. HP recommends that you set down a
blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage.
WARNING!
40
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
Beware of sharp edges inside the chassis.
Advertisement
Table of Contents
