Roller Registration, Roller Assy Hopping - Oki OKIPAGE8c Maintenance Manual

3.3.25 Roller Registration, Roller Assy Hopping

1. Remove the guide paper input assy. (See 3.3.23)
2. Remove the bracket hopping motor. (See 3.3.19)
3. Remove the gear one-way. (See 3.3.20)
4. Remove the holder gear toner assy. (See 3.3.30)
[Removal of the roller registration]
5. Remove the gear 1 and 2 bushes 2 and 2 bearings 3, then 2 roller registrations 4.
[Removal of the roller assy hopping]
Remove the bush 5 and the bearing 6.
6.
Remove E-rings 9 of the sub-roller hopping at both sides of hopping roller and then release
7.
the lock of the roller hopping 7 with the shaft 8 by spreading the claw, then remove the roller
hopping from the left side by sliding the shaft 8 in the arrow direction. (Be careful not to lose
the knock-pin for fastening the roller hopping 7, which slips off together.)
2
1 5
Figure 3.3.25 Roller Registration, Roller Assy Hopping
9
4
8
3 - 32
3
6
7
9