Feed Roller - Oki OKIPAGE8c Maintenance Manual

3.3.4

Feed roller

(1) Remove 16 screws and remove Cover Upper and Cover Lower (see 3.3.1 step1).
(2) Remove the front panel assy (see 3.3.1 step2).
(3) Remove the AOLT-PCB (see 3.3.2).
(4) Remove the hopping motor assy (see 3.3.3).
(5) Remove the latch on the feed roller gear 1 and remove the feed roller gear 1.
(6) Remove the latch on the feed roller bearing 2 and remove the feed roller bearing 2.
(7) Shift the feed roller 3 to the right side and lift it out, holding it on the left side.
1
3
2
B - 14