Tools Included - Vision Fitness XF40 Owner's Manual

TOOlS INClUdEd:

F 8 mm L-wrench
If you have questions or if there
F 5 mm L-wrench
are any missing parts, contact your
F 13/15 mm Flat wrench
authorized Vision Fitness retailer.
F screwdriver
ALL
modELs
X20 pARTS Xf40 pARTS
INClUdEd: INClUdEd:
F 1 main Frame F 1 main Frame
F 1 stabilizer Tube F 1 stabilizer Tube
F 1 guide Rail set F 1 Top Cap Front Cover
F 1 Rear Cover F 1 Top Cap Rear Cover
F 1 guide Rail Cover F 1 Console mast
F 1 Console mast F 2 Lower Handlebars
F 2 Pedal Arms F 2 Lower Link Arms with
F 2 Pedal Arm Cover sets Footpads
F 2 Lower Handlebars F 1 water Bottle Holder
F 2 Lower Link Arms with Footpads F 2 wheel Covers
F 2 Pedal Covers F 2 upper Handlebars
F 1 Top Cap Front Cover F 2 Handlebar Caps
F 1 Top Cap Rear Cover F 1 Hardware Kit
F 1 water Bottle Holder F 1 Power Adapter
F 2 upper Handlebars
F 2 Handlebar Caps
F 1 Hardware Kit
F 1 Power Adapter
10
pRE-AssEmBLY
NEEd HElp?
UNpACkING
unpack the product where you will be using it.
Place the elliptical carton on a level flat surface. It is
recommended that you place a protective covering
on your floor. never open box when it is on its side.
noTE: during each assembly step, ensure that ALL
nuts and bolts are in place and partially threaded in
before completely tightening any onE bolt.
noTE: A light application of grease may aid in the
installation of hardware. Any grease, such as lithium
bike grease, is recommended.
noTE: It is recommended that two people work
together for ease and efficiency while assembling an
elliptical.
AssEmBLY
X20 pAGE 12 Xf40 pAGE 19
ALL
modELs
11