Vision Fitness XF40 Owner's Manual page 10

X20 AssEmBLY STEp 7
X20
CONSOLE
CONSOLE
CABLES
CONSOLE MAST
PRE-INSTALLED BOLTS
18
A Remove pre-installed bolts from console.
B Attach the console cables to the console.
C Carefully tuck the console cables into the
console mast before attaching the console.
d Attach console to console mast using 4 pre-
installed bolts.
noTE: Be careful not to pinch any wires while
attaching the console.
noTE: An uneven product causes stress on
joints, frame and bolts. once you have placed
your elliptical where you intend to use it, adjust
the levelers located on the bottom of the elliptical
frame. see ELLIPTICAL guIdE for more details.
X20 AssEmBLY ComPLETE!
Xf40 AssEmBLY STEp 1
STABILIZER TUBE
ARC WASHERS (C)
SPRING WASHERS (B)
BOLTS (A)
MAIN FRAME
HARdWARE fOR STEp 1:
BOLT (A) SPRING WASHER (B) ARC WASHER (C)
30 mm 15 mm 17 mm
Qty: 4 Qty: 4 Qty: 4
open hardware for step 1.
A
Attach the stabilizer tube to the main
B
frame using 2 bolts (a), 2 spring
washers (b) and 2 arc washers (c) on
each side.
XF40
19