Cisco Aironet 1550 Series Hardware Installation Manual page 75

Chapter 2 Installing the Access Point
Figure 2-23
1
Phillips head M4 x10mm screws (supplied
with pole mount kit)
Screw a M8 x16 bolt in the top support bolt hole on each side the access point (see
Step 4
screw the bolt all the way in; leave approximately a 0.25 inch (0.635 cm) space.
OL-24247-01
Attaching Grounding Lug to Grounding Point
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
1 2
2
Grounding lug
Installing the Access Point
Figure 2-21). Do not
2-35