Chapter 1 Overview - Cisco Aironet 1550 Series Hardware Installation Manual

Hardware Models
Hardware Models
The model numbers (or part numbers) and configuration for the Cisco Aironet 1552 Outdoor Mesh
Access Points are described in
point model is shown in
For a detailed description of the declarations of conformity and regulatory information for the 1552
access points refer to
Table 1-1
Model (or part number)
AIR-CAP1552E-x-K9
AIR-CAP1552H-x-K9
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
1-2
Table 1-1. A detailed list of components supported by each 1552 access
Table 1-2.
Appendix B, "Declarations of Conformity and Regulatory Information."
1552 Access Point Model Numbers and Descriptions
Configuration
Two-radio (2.4 GHz and 5 GHz) modular version.
This model supports three (3) external dual-band
omnidirectional antennas. The antennas can be
ordered with the model. An optional Battery
Backup Unit (BBU) and Small Form Factor
Pluggable (SFP) fiber module can be ordered with
the AP. The AP has the capability to receive and
use an SFP fiber or copper module. Countries
(regulatory domains) represented by the variable x
are described in Table 1-3
For specific regulatory domains supported by this
model, refer to the product data sheet at:
http://www.cisco.com/en/US/prod/collateral/wire
less/ps5679/ps5861/product_data_sheet0900aecd
80537b6a.html
Two-radio (2.4 GHz and 5 GHz) Hazardous
Location (Haz Loc) version. This modular AP
supports Power-over-Ethernet (PoE) input and
output, and 3 external dual-band omnidirectional
antennas. The antennas can be ordered with the
model. Countries (regulatory domains)
represented by the variable x are described in
Table 1-3
For specific regulatory domains supported by this
model, refer to the product data sheet at:
http://www.cisco.com/en/US/prod/collateral/wire
less/ps5679/ps5861/product_data_sheet0900aecd
80537b6a.html
Chapter 1 Overview
OL-24247-01