Cisco Aironet 1550 Series Hardware Installation Manual page 57

Chapter 2 Installing the Access Point
The mounting surface, attaching screws, and optional wall anchors must be able to support a 50-lb
Caution
(22.7 kg) static weight.
To mount the access point on a vertical wall, follow these instructions:
Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. See
Step 1
Figure 2-6
mounting holes or the mounting slots.
Figure 2-6
1 Access point quick mount notch
2
Mounting holes
Use four customer-supplied screws and optional screw anchors to attach the mounting plate to the
Step 2
mounting surface.
Note
OL-24247-01
for the mounting bracket screw hole locations. You can optionally use the individual
Mounting Bracket for Wall Mounting
If necessary, use suitable screw anchors and an exterior-grade plywood backboard to mount the
access point to stucco, cement, or drywall.
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2
3
2
1
3 Mounting slots (allows bracket rotation)
Installing the Access Point
1
2-17