Miele G 8066 Operating Instructions Manual page 47

Problem
The wash cycle finishes
early and the 6
indicator light flashes
(fault code F..A appears
in the display).
Knocking noise in the
wash cabinet.
Rattling noise.
Knocking noise in the
water pipes.
There are rust stains on
cutlery.
Possible cause
The filters in the wash
cabinet are clogged.
The drain pump or
non-return valve may be
blocked.
The drain hose is kinked.
The spray arm is knocking
against an item in the
basket.
Items of crockery are
insecure in the wash
cabinet.
This may be caused by
the on-site installation or
the cross-section of the
piping.
The salt reservoir cap has
not been screwed on
correctly.
The affected items are not
corrosion resistant.
Problem solving guide
Remedy
Before rectifying the
problem you must:
– Switch off the machine
with the Z button.
Clean the filters, see
"Cleaning and Care".
Clean the drain pump and
the non-return valve, see
"Cleaning the drain pump
and non-return valve".
Remove any kink in the
drain hose.
Interrupt the programme,
rearrange items which are
obstructing the spray
arms.
Interrupt the programme
and rearrange the items of
crockery.
This has no influence on
dishwasher function. If in
doubt contact a suitably
qualified plumber.
Replace it making sure it
screws back on correctly.
There is no remedy.
Purchase cutlery which is
dishwasher-proof.
47