Miele G 8066 Operating Instructions Manual page 11

The following points should be
observed to assist in maintaining
quality standards, to protect users,
and to avoid damage to the machine
and items being cleaned.
Only use cleaning agents
designed for use in this type of
machine. The use of unsuitable
cleaning agents could adversely affect
the components of the machine, as well
as items being cleaned.
Only use low-foaming cleaning
agents. Incorrect cleaning agents,
as well as some types of soiling can
cause a build-up of foam in the
machine. Foam can have an adverse
effect on the cleaning process.
Please be aware that changes in
formulation, storage conditions etc,
which may not be publicised by the
chemical producer, can have a
negative effect on the cleaning result.
When using cleaning agents and
special application chemicals, it is
essential that the manufacturer's
instructions are followed. Only use such
chemicals for the purpose and in the
situation specifed, to the exclusion of
other chemicals, to avoid such dangers
as chemical reactions and material
damage.
Warning and Safety instructions
The machine is designed for
operation with water and additive
cleaning agents only. Organic solvents
must not be used in this machine, as
there is the danger under certain
circumstances of fire or explosion.
(Although this is not the case with all
organic solvents, other problems could
arise with their use, for example
damage to rubber and synthetic
materials).
The special inserts should only be
used for their specific application.
Empty any containers or utensils
before arranging them in the
machine.
Do not allow any remains of acids
or solvents, and in particular
hydrochloric acid or chloride solutions,
to get into the wash cabinet. Similarly
avoid any materials with a corrosive
effect.
The presence in compounds of any
solvents should be minimal (especially
those in hazard class A1).
To avoid any corrosion damage,
ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine.
Please follow the advice on
installation in these instructions
and the separate Installation diagram.
11