Restarting The Computer; Sleep Mode - Toshiba NB10 User Manual

3.
4.
5.
Do not turn the computer or peripheral devices back on immediately - wait
a short period to avoid any potential damage.

Restarting the computer

Certain conditions require that you reset the computer, for example if:
If you need to restart the computer, there are two ways this can be
achieved:

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the computer into Sleep Mode. In this
mode data is maintained in the computer's main memory so that when you
turn on the power again, you can continue working right where you left off.
When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always completely
shut down the computer. This includes turning off any wireless
communication functionalities, and cancelling settings that reactivate the
computer automatically, such as a timer recording function. Failure to
completely shut down the computer in this way could allow the operating
system to reactivate and run pre-programmed tasks or preserve unsaved
data, which could interfere with aviation or other systems, possibly causing
serious injury.
User's Manual
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause
data loss.
Click the Settings charm.
Click Power and then select Shut down.
Turn off any peripheral devices connected to your computer.
You change certain computer settings.
In the Settings charm, click Power and then select Restart.
Press CTRL, ALT and DEL simultaneously (once) to display the menu
window, and then select Restart by clicking the power icon (
lower-right corner.
Before entering Sleep Mode, be sure to save your data.
Do not switch to Sleep Mode while transferring data to external media,
such as USB devices, memory media or other external memory
devices. Data will be lost.
Do not install or remove a memory module while the computer is in
Sleep Mode. The computer or the memory module could be damaged.
) in the
2-9