Restarting The Computer; System Recovery Options - Toshiba NB205 Series User Manual

Standby Mode limitations
Standby Mode will not function under the following conditions:
■
Power is turned back on immediately after shutting down.
■
Memory circuits are exposed to static electricity or electrical noise.

Restarting the computer

Certain conditions require that you reset the computer, for example if:
■
You change certain computer settings.
■
An error occurs and the computer does not respond to your keyboard
commands.
If you need to restart the computer, there are two ways this can be
achieved:
1. Click Start then click Turn Off Compute. From the Turn Off Computer
menu select Restart.
2. Press the power button and hold it down for five seconds. Wait ten to
fifteen seconds, then turn on the power again by pressing the power
button.

System Recovery Options

You can use TOSHIBA Disc Creator when you connect External ODD.
Create optical recovery discs
A recovery image of your computer is stored on the hard disk. You may use
this image to create CD or DVD recovery discs using the following steps:
1. Select either blank CDs or DVDs media.
2. The application will allows you to choose a type of media to create
recovery CDs/DVD including: CD-R, CD-RW, DVD-R, DVD-RW,
DVD+R and DVD+RW.
Some media may not be compatible with optical drive of your computer.
Please verify your optical drive supports the blank media you choose.
3. Turn on your computer to open Windows XP.
4. Insert the (first) blank media into the tray of the optical drive.
5. Double click the Recovery Disc Creator icon on the Windows XP
desktop, or select the application from Start menu.
6. After Recovery Disc Creator starts, select the type of media and the title
you wish to copy to the media then click the Burn.
User's Manual
Getting Started
3-11