Sharp GX30 User Manual page 53

Taking Pictures
1.
Press to display the Main menu.
Press a, b, c or d to highlight "Camera", then
2.
press to select.
Press a or b to highlight "Take Picture", then
3.
press to select.
The preview is displayed through the main display.
4.
Press or the side-down key to take the picture.
The shutter sounds and the still image of the taken
picture is displayed.
Press A [Save].
5.
If you have selected "Choice" when saving, the
memory card is not inserted, or memory has run out,
press a or b to highlight "Save to Handset" or
"Save to Card", then press
"Saving (file name) to My Stuff..." is displayed,
then the picture is registered.
If you wish to send a picture by multimedia message
after taking the picture, press
Press F to return to stand-by.
6.
Tip
• Pressing E during stand-by also activates digital
camera mode.
52 Camera
.
before step 5.
• To leave digital camera mode without registering the
taken picture after step 4, press F and then press A
[Yes].
• When the distance to the subject is approximately 5
cm, set the macro switch to the macro position (
When the distance to the subject is approximately 40
cm or more, set the macro switch to the normal
position ( ).
To Switch the Viewfinder
You can switch the viewfinder from the main display to
the external display for taking a self-portrait.
Press P when the preview is displayed through the
main display.
Each time you press P, the viewfinder switches
between the external display and the main display.
When you use the external display as the viewfinder,
the taken pictures are saved automatically.
).