Connecting Gx30 To Your Pc; System Requirements; Gsm/Gprs Modem; Handset Manager - Sharp GX30 User Manual

Connecting GX30 to Your PC

You can use the following functions by connecting the
GX30 to your PC using an infrared port or USB port*:

• GSM/GPRS modem

• Handset Manager for GX30
* Requires an optional USB data cable XN-1DC30 for
USB port connection.

System Requirements

Operating System: Windows
®
Windows 2000**, Windows
®
* Windows 98 Second Edition, Windows
Service Pack 1
** Service Pack 4
***Service Pack 1a
Interface: Infrared port or USB port
CD-ROM drive
GSM/GPRS Modem
You can use GX30 as a GSM/GPRS modem to access
the Internet from your PC. Connect your phone to your
PC via the Infrared connection or a USB cable and
install the necessary software. For details, see
"Software Installation" on page 192.
® ®
98*, Windows Me,
®
XP***
®
98
Modem via the Infrared Connection
To use the modem function via the Infrared connection,
see "Using the Infrared Function (For Modem)" on
page 175 and turn the modem function on.
Modem via the USB Cable
To use the modem function using a USB cable, use the
cable mentioned above and see the instructions
accompanying the cable.
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Note
• Modem communication is not possible whilst
communicating with the Handset Manager via the
Infrared connection or USB cable.

Handset Manager

You can transmit picture, sound and video clip, and
Contacts List entries between your phone and your PC,
and can use Contacts List entries on your PC.
To use the Handset Manager function, see "PC
Software" on page 175 and set your phone to Data
Transfer mode.
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Connecting GX30 to Your PC 191