Sharp GX30 User Manual page 105

Changing the File Name
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 102.
Press a or b to highlight the file name you wish
2.
to change, then press A [Options].
The Options menu is displayed.
Press a or b to highlight "Rename", then press
3.
or A [Select] to select.
4.
Enter a new file name.
To delete the last character, press C [Clear] briefly.
Press and hold C [Clear] to clear all characters.
5.
Press .
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, >, | and . (full-stop).
(Full-stop can be used for sound files in the memory
card.)
Tip
• When "Edit Data" is displayed in the menu in step 2,
you are able to edit the sound (p. 134). Once you
have completed editing the newly saved file
overwrites the old file. This new file then becomes the
original ringtone.
104 My Stuff
Setting the Tone and Strength
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 102.
Press a or b to highlight the file name you wish
2.
to edit, then press A [Options].
The Options menu is displayed.
Press a or b to highlight "Set Tone" or "Set
3.
Strength", then press
For full details, see pages 131 to 134.
Note
• If "Set Tone" and "Set Strength" are not displayed
in the menu in step 2, you cannot change these
settings.
Sending Messages
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 102.
Press a or b to highlight the file name you wish
2.
to send, then press A [Options].
The Options menu is displayed.
Press a or b to highlight "Create Message", then
3.
or A [Select] to select.
press
If you select your original ringtone in step 2, perform
the following, otherwise go to step 5.
or A [Select] to select.