Sharp GX30 User Manual page 159

Setting the Display Saving
This phone's screen will automatically turn off after a
given amount of time if the phone is left open. This is
in order to conserve battery life.
You can change the time before the Display Saving will
go into effect from between 2 and 20 minutes.
Tip
• When you purchase this phone, Display Saving is set
to 10 minutes.
1.
Perform steps 1 to 3 in "Opening the Phone Settings
Screen" on page 152.
Press a or b to highlight "Main Display", then
2.
press to select.
Press a or b to highlight "Display Saving", then
3.
press to select.
4.
Enter the time before Display Saving takes effect in
two digits (02 to 20 minutes) using the digit keys,
then press .
Note
• Display Saving does not work whilst you are calling,
using WAP, or using an application.
158 Settings
To Cancel the Display Saving Function
The display saving continues until either a key is
pressed or there is an incoming alert. The first key press
only cancels the Display Saver. You must press another
key in order to input any numerical or text value.
Setting the Greeting Message
You can set the message which will appear when the
phone is turned on.
1.
Perform steps 1 to 3 in "Opening the Phone Settings
Screen" on page 152.
Press a or b to highlight "Main Display", then
2.
press to select.
Press a or b to highlight "Greeting Message",
3.
then press to select.
Press a or b to highlight "On", then press
4.
select.
5.
Enter the message, then press
Up to 16 characters can be stored as a message.
For details on entering characters, see "Entering
Characters" on page 32.
Tip
• To cancel the Greeting Message setting, select "Off"
in step 4.
to
.