Sharp GX30 User Manual page 149

Checking the Total Call Cost
1.
Perform steps 1 to 4 in "Checking the Cost of the
Last Call" on page 147.
Press a or b to highlight "All Calls", then press
2.
to select.
When you have finished, press C [Back].
3.
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
1.
Perform steps 1 to 4 in "Checking the Cost of the
Last Call" on page 147.
Press a or b to highlight "Cost Units", then press
2.
to select.
Press a or b to highlight "Set Units", then press
3.
to select.
4.
Enter your PIN2 code, then press
5.
Enter a cost per unit, then press
To enter a decimal point, press R.
6.
Enter a currency unit (up to 3 characters), then press
.
148 Contacts
Checking the Charge Rate
1.
2.
3.
4.
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
1.
2.
.
3.
.
4.
5.
Perform steps 1 to 4 in "Checking the Cost of the
Last Call" on page 147.
Press a or b to highlight "Cost Units", then press
to select.
Press a or b to highlight "Read Units", then press
to select.
The charge rate is now displayed.
When you have finished, press C [Back].
Perform steps 1 to 4 in "Checking the Cost of the
Last Call" on page 147.
Press a or b to highlight "Max Cost", then press
to select.
Press a or b to highlight "Set Limit", then press
to select.
Enter your PIN2 code, then press
Enter a value, then press
To enter a decimal point, press R.
.
.