Operation - Central Pneumatic 47016 67181 Owner's Manual & Safety Instructions

Delayed or inadequate cleaning will permanently clog the Spray Gun.
Latex paint hardens quickly and permanently inside Spray Gun.
Operating Instructions
Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Inspect tool before use, looking for damaged, loose, and missing parts.
If any problems are found, do not use tool until repaired.
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the air hose along a safe path to reach
the work area without creating a tripping hazard
or exposing the air hose to possible damage.
The air hose must be long enough to reach
the work area with enough extra length to
allow free movement while working.
3. Before spraying, mask nearby objects not being
sprayed and lay cloths (not included) on the floors.
Item 47016 67181
NOTICE
Clean the Spray Gun IMMEDIATELY after EVERY use.
For technical questions, please call 1-888-866-5797.
Cup
Lock Ring
Nozzle
Trigger
Air Knob
Figure C: Components and Controls
Fluid
Knob
Pattern
Adjustment
Knob
Air Inlet
Page 9