Fax Storage Location; Adf Edge Erase; Fb Edge Erase - Lexmark X734de Service Manual

Fax Storage Location

This setting only appears if a hard disk is installed. Selections are NAND or Disk.
1.
Touch Fax Storage Location on the Config Menu.
2.
Touch the left arrow or the right arrow to toggle between NAND and Disk.
3.
Touch Submit.
Note: If a hard disk is not installed, the multiple function printer automatically stores all buffered faxes on NAND,
and this menu does not appear. Disk is the default storage location.

ADF Edge Erase

The value of this setting determines the size (in millimeters) of the "no-print" zone around an ADF scan job. A
copy job always has at least a 2mm border; therefore, the border size is either 2mm or the value of this setting,
whichever is larger.
To change the value for ADF Edge Erase:
1.
Touch ADF Edge Erase in the Config Menu.
2.
Touch the right or left arrows to change the value from 0 to 6 (3 is the default).
3.
Touch Submit.
Submitting changes... is displayed.
You are automatically returned to the Configuration main menu.

FB Edge Erase

The value of this setting determines the size (in millimeters) of the "no-print" zone around an ADF scan job. A
copy job always has at least a 2mm border; therefore, the border size is either 2mm or the value of this setting,
whichever is larger.
To change the value for FB Edge Erase:
1.
Touch FB Edge Erase in the Config Menu.
2.
Touch the right or left arrows to change the value from 0 to 6 (3 is the default).
3.
Touch Submit.
Submitting changes... is displayed.
You are automatically returned to the Configuration main menu.
7526
3-37
Diagnostic aids